On the Road (How to Get Here)



Traveling to Durham, NH:

By Air:

Air service is available at Boston's Logan Airport, Manchester (NH) Airport, or Pease International Tradeport in Portsmouth, NH. If you're staying at the New England Center (see Lodging information), transportation is available to deliver you there directly. If you plan on renting a car anyway and can get the flight arrangements, Manchester Airport is the most convenient and least amount of traffic headaches.

For Logan Airport, besides the traditional car rental agencies, C & J Trailways (1-800-258-7111 outside NH, 1-603-742-5111 in NH) operates a shuttle bus service directly to downtown Durham, as well as stops in Dover, NH. Once in Durham, the New England Center is within walking distance (about mile). The bus stops at the Lower Level of all terminals in Logan. Car rentals are also available at Manchester Airport and Pease Tradeport, but no shuttle service except the New England Center transportation is available. Delta and United Airlines offer service to Pease Tradeport. Please call if you are having troubles getting transportation from any of the airports, as we may be able to make arrangements to get you picked up and delivered.

By Car:

From Logan Airport:

Exit the airport and follow signs to Routes 1A and 1 North towards Maine and NH. Get on Route 95 North, then follow directions below.

From the South and East:

Take Interstate I-95 North into New Hampshire, to Exit 4 (Spaulding Turnpike and Routes 4 & 16). Follow the Spaulding Turnpike for 5 miles, and take Exit 6W onto Route 4 West. Continue past the lights for Madbury Road, then take the next exit (Route 155A, UNH/Durham). Turn left at the bottom of the ramp, then take the last right off the mini traffic circle (opposite the athletic fields). Go aproximately 1/4 mile and take your first right. Putnam Hall will be the white building off to your right, and Cole Hall is the brick building on the left. Park in the Visitor's Center Parking area just past Cole and Barton Hall, on the left.

From the North:

Take Interstate 93 South to Route 4/202 East. Follow Route 4 through two traffic circles (Epsom and Lee), then take the second exit on Route 155A for UNH/Durham. Bear right at the bottom of the ramp, then take the last right off the mini traffic circle (opposite the athletic fields). Go aproximately 1/4 mile and take your first right. Putnam Hall will be the white building off to your right, and Cole Hall is the brick building on the left. Park in the Visitor's Center Parking area just past Cole and Barton Hall, on the left.

From the Manchester Airport:

Follow the signs out of the airport, then turn right at the light, heading towards Interstate 293. Go 1.3 miles, and turn right onto the ramp for 293 South/101 East. Follow the signs for 101 East, taking 93 North/101 East, and then Exit 7 towards Route 101 East. Go approx. 18 miles on 101 East, to Route 125 North (Epping). Follow Route 125 North through Epping to the traffic circle in Lee, and head East on Route 4. Take the second exit on Route 155A for UNH/Durham. Bear right at the bottom of the ramp, then take the last right off the mini traffic circle (opposite the athletic fields). Go aproximately 1/4 mile and take your first right. Putnam Hall will be the white building off to your right, and Cole Hall is the brick building on the left. Park in the Visitor's Center Parking area just past Cole and Barton Hall, on the left.

Directions to the New England Center:

Once on the UNH campus, go past the second left, over the bridge that crosses the railroad tracks, then take the next left (Edgewood Road). Take the next right onto Strafford Avenue, and the New England Center will be on your right.

The CAD Lab:


Putnam Hall Lab:

Walk across the street from the Visitor's Parking Lot, and enter Putnam Hall at the front door. Proceed all the way down the long corridor, into the industrial arts shop, and through the double-doors at the opposite end of the shop. Enter the corridor go right, the CAD/GIS Lab (Room 21) is the last room on the right.

Parking:


Parking is at the Visitors Center which is across the street from Putnam Hall where the classes are held.
On weekdays before 6pm either park at one of the metered spots or purchase a parking pass at the Visitors Center.
Parking at the metered spots and/or purchasing a parking pass is not required on weekends or past 6pm on weekdays.

Lodging:


To be updated soon

Lodging is also available in Dover and Portsmouth, assuming you have transportation:

Dover Days Inn, 481 Central Avenue, (603) 742-0400
Portsmouth Holiday Inn, 300 Woodbury Ave., (603) 431-8000
Check www.Superpages.com for more options

Questions?

The CAD Training Manager can be reached via email at CADTraining@g4com.com should you have any additional questions.